Auto Lifts & Jacks

Atlas PV12PX 12,000 lb Overhead 2-Post Lift Overview

Atlas PV12PX 12,000 lb Overhead 2-Post Lift is a Car Lifts product available at NexaDigital.

The Atlas® PV series represents the absolute best value for the customer who demands a heavy duty professional grade two post lift at the lowest possible price. Atlas® has been manufacturing the PV series two post above ground lifts for over a decade. Thousands sold! Descriptions such as “bulletproof”, built like a brick outhouse, tougher than nails, and other such euphemistic phrases are used every day to describe any of the Atlas® PV series models.

The Atlas® PV12PX is a commercial grade lift designed to accommodate both long wheel base trucks and because of a low pad height, passenger cars. The distance between the symmetrical columns is almost 123″ with a drive through space of over 108″. The extra distance between the symmetrical columns will allow the widest of vehicles or vehicles with wide rearview mirrors to be lifted or driven through. The increased length of the symmetrical arms coupled with the additional height of the included peg style truck adapter set allows the operator to safely raise long wheel base trucks with a variety of running boards. The extra height means extra clearance allowing you to lift vans and box trucks without worry.

The Atlas® ATTD-PV12PX features three height settings, the lowest setting of 152 inches or 12 foot 8 inches requires the purchase of extra short cables.

• 12,000 lb capacity
• Extra Tall & Extra Wide
• Commercial Grade
• Adjustable height 165″ (13′ 9″) or 177″ (14′ 9″)
• Special low height 152″ (12′ 8″) (Requires purchase of extra cables)
• Symmetric arms
• Automatic Arm Restraints
• “Padded” Shut-Off Bar
• Door Guards on Carriages
• Single Point Lock Release
• Direct-Drive Cylinders
• Powder Coat Finish
• Free 12 Piece Truck Adapter Set
• Mounting Hardware Included
• Shipping weight: 2,160 lbs.
• 5 yr Structural – 2 yr Hydraulic Warranty – Parts Only

Car Lifts at NexaDigital

Browse more Car Lifts at NexaDigital.

Bendpak Dual-width, 10,000 lb capacity, Clearfloor Overview

Bendpak Dual-width, 10,000 lb capacity, Clearfloor is a Uncategorized product available at NexaDigital.

The safe and rugged XPR-10S-168 two-post lift features extended height columns for added overhead clearance and an adjustable top beam to accommodate wide or narrow installation set-ups. The adjustable width design allows you to choose the best setting for your specific space or vehicle lifting requirements. The highly sophisticated yet simple and dependable XPR-Series design requires very little service or maintenance for an overall lower cost of ownership. All BendPak’s XPR two-post models feature dual “direct-drive” low-pressure cylinders, maintenance free UHMW load bearings, single-piece columns, extra-tall lifting carriages and triple-telescoping arm configurations for increased arm positioning versatility.

• 10,000-lb lifting capacity
• CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
• Bolt-on 24″ column extensions provide added overhead clearance
• Expandable top beam accommodates wide or narrow configurations
• Padded overhead safety shutoff bar
• Single-piece columns
• Drop-end arms provide a lower pad height
• Dual hydraulic direct-drive cylinders
• Oversized 53″ tall carriage for superior strength and durability
• Electric / hydraulic power system
• Large, 17″ x 19″ A36 steel base plate
• Self-lubricating dura-glide UHMW polyethylene bearing system
• Single-point safety release
• Safety locks in each column spaced every 3″
• Automatic arm restraints
• Heavy-duty 1/2″ aircraft-quality equalizer cables
• Oversized cable sheave diameter reduces cable fatigue
• 4-piece 63 mm stackable adapter set comes standard
• Triple-telescoping arms
• Versatile drop-in contact pads with stackable adapters
• ALI Approved.

Uncategorized at NexaDigital

Browse more Uncategorized at NexaDigital.

TP9KSCX, 9,000 lb 2 Post Car Lift Clears Floor – Symmetric Overview

TP9KSCX, 9,000 lb 2 Post Car Lift Clears Floor – Symmetric is a Car Lifts product available at NexaDigital.

Car Lifts at NexaDigital

Browse more Car Lifts at NexaDigital.

Tuxedo FP12K-K 12,000 lb Four Post Lifts – Cable Driven Overview

Tuxedo FP12K-K 12,000 lb Four Post Lifts – Cable Driven is a Car Lifts product available at NexaDigital.

Car Lifts at NexaDigital

Browse more Car Lifts at NexaDigital.

Mayflower Blacksmith Heavy Duty Clear Floor Two Post Lift Car lift CF 9000 lbs Overview

Mayflower Blacksmith Heavy Duty Clear Floor Two Post Lift Car lift CF 9000 lbs is a Car Lifts product available at NexaDigital.

Mayflower Blacksmith Clear Floor Overhead Two Post Lift Car lift CF9000 lb

• Driving Mode: Heavy Duty Two hydraulic cylinders, chain drive
• Voltage: 220 Voltage
• Lifting weight capacity: 9,000 lbs
• Lifting height max: 71″
• Lifting height max with Truck Adapter: 75″
• Overall Height: 146″
• Overall Width: 135″
• Width between Posts: 109″
• Drive Thru Width: 92″
• Lifting Time: 40 sec – 50 sec
• Motor: 220V 60Hz 1 Phase / 3 Horse Power
• Front Arm assembly 2 Stage reach from 28″ to 42″
• Rear Arm assembly 2 Stage reach from 32″ to 62″
• Double two point safety lock release with built-in 18 locking positions
• Automatic arm lock restraints
• Drop-in type lifting pads and truck adapters included
• Relief valve built in power pump to prevent overloading
• Heavy duty 3/10″ diameter cable and 3 2/5″ pulley that reduce high stress on synchronization process and increase cable life
• Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
• Floor concrete requirement: 4″ Depth, 3000 PSI Rebar Reinforced
• Anchor bolts/mounting hardware included
• 1 set of 4″ Truck adapters included
• Door guards protection rubber is optional
• Blue Powder coated finish provides superior resistance against corrosion.
• Shipping Weight: 1350 LB

Car Lifts at NexaDigital

Browse more Car Lifts at NexaDigital.

Bendpak 10000 LB Capacity Asymmetric Cearfloor Overview

Bendpak 10000 LB Capacity Asymmetric Cearfloor is a Uncategorized product available at NexaDigital.

Because taller mechanics are sometimes at a disadvantage while they work, we’re making it easier to wrench under a fully raised vehicle. The XPR-10AXLS model adds 6″ of lift and extends the overall height by 6″. This may seem like a small change, but taller people know that the difference between stooping and standing under a two-post lift can be the difference between severe back/neck pain and working in total comfort.

The XPR-10AXLS Offers Extended Height PLUS 75″ Cylinder Stroke

10K car lifts don’t offer taller lift carriages or get easier to work under than this. If you need maximum security and an extended working height that’s ideal for taller individuals, you need the BendPak XPR-10AXLS. This particular two-post lift features an absolutely massive 75″ cylinder stroke, which means we did more than just extend the columns for the sake of overhead clearance. We actually lift the bottom of the vehicle 6″ higher than our standard 10K lift height. True safety in a car lift requires tall carriages; higher carriages eliminate balance issues than come into play when lifting trucks and SUVs.

This car lift is truly something to get excited about. If your shop has the overhead clearance-at least 13′-the XPR-10AXLS might be the best lift you ever purchase. The big n’ tall techs in your shop won’t forget it!

Rise High and Prosper

Direct-Drive two-post car lift technology
The XPR-10AXLS two-post car lift offers tandem performing, low-pressure HVLP direct-drive cylinders that replace the lifting chains and screw-type mechanisms often featured on other two-post lifts. These direct-drive cylinders prevent leaks, are more reliable and run more smoothly than other systems too. Two-post lift operators generally prefer our Direct-Drive technology, as it requires fewer moving parts than chain-over lifts. Hydraulic fluid gets pressurized, starting at the power unit and flowing through the hollow cylinder rods. The downward motion of the piston rod raises the massive 75″ lift carriage while dual-synchro equalizers ensure a safe, even, worry-free lift.

Two-Stage Telescoping Screw Pad Assembly Kit
BendPak’s two-stage telescoping screw pads are second-to-none in strength and durability. That’s good, because we hope you’re going to be using this car lift for decades. Gouge and tear-resistant polyurethane pads improve safety and ensure you’re not constantly replacing equipment. We even throw in a set of 63 mm stackable adapters when you purchase the XPR-10AXLS.

Low-profile, dropped-end frame contact pads
Extremely low-profile contact pads are well-suited for compacts and sport cars. The dropped-end frame design makes your two-post lift arguably the most versatile car lift ever made.

Triple-telescoping front arms and two-stage rear arms
Increases overall arm positioning for lifting a variety of wheelbases. Overall arm sweep and minimum arm reach are also extended to precisely lift vehicles that have unibody construction, OEM-recommended pick-up points and wide and/or narrow configurations.

Lowered arm tube supports
Our arm tube supports are kept low, maximizing clearance for vehicles of almost any size and type under 10,000 lbs.

Automatic arm restraints
Each car lift arm has extremely durable restraints that engage when the lift rises and release as it lowers. This makes repositioning the arms fast, easy and always safe.

Our tallest lift carriages ever
The 75″ carriage height on the XPR-10AXLS is the highest in class for our 10K two-post lifts. You’ll be hard-pressed to find a safer lift at a better value for your taller techs. Finally, tall mechanics can work ergonomically-no more painful stooping to get the job done.

Maintenance-free load bearings
BendPak uses UHMW load bearings to protect your vehicle when it’s up in the air. These bearings are located at the pivot point where the telescoping arm meets the lift carriage. Ours are so well designed they’re virtually indestructible and should last more than the lifetime of your lift.

Single-piece columns
Why make our two-post car lift columns a single piece of steel? It reduces stress and fracture points. Simply put, your columns are never going to let you down. The foundation of every BendPak lift is built to last for many decades of continuous, heavy-duty use in a fast-paced shop.

Single-point safety release
Safety is our main concern, and that’s no joke when lifting up to 10,000 lbs. A single point safety release ensures two hands need to be on the lift during operation. This virtually eliminates pinch potential and other accidents that commonly occur on car lifts made by less scrupulous manufacturers.

Auto shutoff
A super-tall two-post lift needs a safety measure to ensure high-clearance vehicles don’t smash into the upper support beam. The padded auto-shutoff bar ensures lift functions cease the second a vehicle touches it.

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2011 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.


Features & Specs:

• 10,000-lb lifting capacity
• Expandable top beam accommodates wide or narrow drive-thru configuration
• Double-telescoping screw pads offer increased versatility
• Added overhead safety shutoff bar
• Exclusive Tru-Metric arm design for more versatile arm positioning
• 30° rotated single-piece columns
• Single-point safety release
• Drop-end arms provide a lower pad height
• Dual hydraulic direct-drive cylinders
• Oversized 59″ tall carriage for superior strength and durability
• Electric / hydraulic power system
• Large, 17″ x 19″ A36 steel base plate
• Self-lubricating dura-glide UHMW polyethylene bearing system
• Safety locks in each column spaced every 3″
• Automatic arm restraints
• Heavy-duty 1/2″ aircraft-quality equalizer cables
• Oversized cable sheave diameter reduces cable fatigue
• 4-piece 63mm stackable adapter set comes standard
• Triple-telescoping arm design
• Versatile drop-in contact pads with stackable adapters
• ALI Approved.

Uncategorized at NexaDigital

Browse more Uncategorized at NexaDigital.

BP10000X 10,000 lb Capacity Commercial Grade Baseplate Lift Overview

BP10000X 10,000 lb Capacity Commercial Grade Baseplate Lift is a Car Lifts product available at NexaDigital.

The Atlas BP10000X commercial grade 2 post baseplate lift is built for those customers who want to lift heavy vehicles in a low ceiling garage. The Atlas BP10000X incorporates the popular single point lock release columns have a middle welded support gusset that adds extra strength to the oversized columns. If you need to lift a one ton dually or a Smart Car and only have an 11 foot ceiling, this is the lift for your shop.

• 10,000 lb. Capacity
• Commercial Grade
• Baseplate, Open-Top Style Lift
• Overall Height: 111 7/8″ (9′ 3 7/8″)
• Single-Point Lock Release Allows Both Columns To Be Disengaged Simultaneously
• Super-Symmetric Arms
• Dual Hydraulic Chain-Drive Cylinders Made to ANSI Standard
• Welded Support Gussets Increase Column Strength.
• Automatic Arm Restraints
• Powder Coat Finish
• Free 12 Piece Truck Adapter Set
• Shipping Weight: 1,640 LBS.
• 5 yr Structural – 2 yr Hydraulic Warranty – Parts Only

Car Lifts at NexaDigital

Browse more Car Lifts at NexaDigital.

Tuxedo FP8K-DX-XLT 8,000 Lb Extended Length / Height Four Post Storage Lifts Overview

Tuxedo FP8K-DX-XLT 8,000 Lb Extended Length / Height Four Post Storage Lifts is a Car Lifts product available at NexaDigital.

Car Lifts at NexaDigital

Browse more Car Lifts at NexaDigital.

Stratus Commercial Grade On-Ground or In-Ground Mount Low Profile Full Rise Scissor Car Lift SAE-UT10000 Overview

Stratus Commercial Grade On-Ground or In-Ground Mount Low Profile Full Rise Scissor Car Lift SAE-UT10000 is a Car Lifts product available at NexaDigital.

This low-profile double scissor lift comes with On-Ground surface mount or In-Ground flush mount design, it is pneumatic safety lock release with overload protection, easy to operate and maintain. Full size scissor car lift is suitable to hold 10,000 lbs. or less, ideally for inspection, repair and maintenance of various types of vehicles.

Important Notes

• A $250 Surcharge will be applied to the following: OR, WA, ID, MT, ND, SD and ME
• Sales tax will be automatically waived for out of Texas Buyers
• Lift can ONLY be shipped to Commercial Address, Local Installer or Truck Terminal
• Buyer is responsible for unloading freight – freight companies have a time limit of 30 minutes, any time exceeding will be charged to customer
• There is an In-House pick-up discount of $380

Product Features

• Commercial grade open center full rise low profile scissor lift
• 2 in 1 design – On-Ground surface mount or In-ground flush mount (see detailed foundation plan)
• Pneumatic safety lock release
• Durable cylinders with anti-surge valves
• Overload protection
• Alloy solid steel X structure, good rust resistance and not easy to deform
• Ramp can be used as platform extension suitable for different length of chassis
• Wear-resisting bearings
• 9 lock position, each lock position is 2 1/8″ (55mm) apart.
• 8 pcs rubber pads included, 4 of each 1 1/2″ & 4″
• Low profile design, minimum height is only 4 5/16″
• 24V low voltage control system
• Platforms can be extended for long vehicles
• Self-lubricated bushing and bearing
• Proofed by dynamic test with 115% of rated capacity and static test with 150% rated capacity
• Powder coating finish: Granite Gray (RAL 7026) + Rein orange (RAL 2004)

Product Specifications

Car Lifts at NexaDigital

Browse more Car Lifts at NexaDigital.

APlusLift 10000 LB 2-Post Overhead Heavy Duty Car Lift Overview

APlusLift 10000 LB 2-Post Overhead Heavy Duty Car Lift is a Car Lifts product available at NexaDigital.

APlusLift HW-10KOH is one of most affortable overhead car lift (auto hoist) with 10000 LB capacity and strong double “S” columns.

Specifications

• Overall Height: 143 3/16″
• Overall Width: 134 5/16″
• Lifting height without Truck Adapters: 75″
• Lifting height with Truck Adapters: 81″
• Minimum Height of Arm Top: 4.5″
• Drive Through Width (Carriage to Carriage): 100″
• Column to Column Width: 109″
• Column Cross Section: 11″L x 7″W
• Driving Mode: Dual hydraulic cylinders, chain drive
• Motor: 220V Single Phase 3HP (need a 30A breaker)
• Hydraulic Oil: 3-5 gallons AW32/AW46
• Time to full rise: 50 sec

• Combo (Symmetrical and Asymmetrical) Arm Assembly
• Front/Rear 3 Stage reach from 22 7/8″ to 42 5/8″
• Rear 2 Stage reach from 33 5/8″ to 52 7/8″
• Adjustable Screw Pads 4 pieces included
• Truck adapters 4 pieces included

• Concrete Requirement: 6″ at 3500psi (4″ for vehicles 9000LB and below)
• Anchor bolts, tool trays, and toe guards included

• Column Steel Thickness: 13/64″
• Carriage Steel Thickness: 15/64″
• Arm Steel Thickness: 15/64″
• Carriage Yoke Thickness: 5/16″
• Base Plate Steel Thickness: 5/8″

Car Lifts at NexaDigital

Browse more Car Lifts at NexaDigital.

The HD-7PXW was created as the exclusive showroom vehicle display lift for dealerships nationwide. As part of our push to offer dealers better vehicle display options, the HD-7PXW stacks two cars in a “jewel box” glass display in front of their dealership. Attract customer’s passing by on nearby highways or within the main showroom. Our specially designed four-post lift features full 360-degree visibility of the car from all sides and includes an attractive low-sheen, rich black powder coat finish. More than just unique styling, this car lift is easy to use and features a platform locking system that safely secures raised vehicles in varied height positions for an open display viewing area. Its hydraulic drive system is hidden under the fully covered platforms for a clean, clutter-free look. The HD-7PXW four-post lift has a 7,000-lb. lift capacity and 188″ long runways to accommodate a variety of vehicle types and wheelbases.

Why get a display lift?

Auto dealerships are always looking for an edge when it comes to their displays. The newest vehicles, or the ones most likely to attract customer attention, need to be prominently shown and visible from the street. The narrow dimensions of this lift, as well as its sleek, low-sheen black coloration, allow it to blend seamlessly into busy lots and showrooms. This way, the vehicles are all that people notice. Its 12-foot high rise is also perfect for getting cars seen from over the highway or across the street. Designed originally for dealerships of any size, this lift is perfect for anyone desiring to gain an edge over the competition. Our job is to help make your inventory look its best, so you can increase your dealership’s foot traffic and close more deals.

Same great benefits as other lifts

The HD-7PXW has all the same safety and convenience features as other BendPak four-post lifts. A one-touch pneumatic safety release instantly releases all locks simultaneously, and the lift’s lone hydraulic cylinder is neatly tucked under the power-side runway. Additionally, the entire undersides of both runways are completely covered to improve the aesthetics of the lift when viewed from underneath. Since this lift reaches incredible heights, we felt it necessary to cover up the mechanical and electric-hydraulic componentry. There’s simply no better-looking and higher-reaching display lift on the market than the HD-7PXW.

Atlas Platinum PVL9BP 9,000 lb Baseplate Lift Overview

Atlas Platinum PVL9BP 9,000 lb Baseplate Lift is a Car Lifts product available at NexaDigital.

The Atlas® Platinum PVL9BP is a 9000 LB capacity, base-plate two-post lift designed for professional service centers. The open-top design of this lift makes it ideal for garages with low ceilings or for customers who don’t want to worry about the limitations of a top beam. The total column height is 111 1/8″ (9′ 3 1/8″). The Atlas® Platinum PVL9BP can lift a range of the most common vehicles on the market, both foreign and domestic, while also having the capacity to handle both full-size pickups and commercial vehicles.

The Atlas® Platinum PVL9BP is ALI Certified and backed by one of the Industry’s best warranties for an added piece of mind.

The Atlas® Platinum PVL9BP features a premium ALLY power unit which is certified by MET Laboratories Inc. for electrical compliance in the United States and Canada. Extra heavy-duty armatures and more motor windings with increased silver metal included in the wires and connections create far less heat generation and allow ALLY Hydraulic power units to maintain constant torque through the lifting process. This power unit also carries an industry leading two-year limited warranty.

• ALI Certified
• 9,000 lb. Capacity
• Commercial Grade
• 3-Stage Symmetric Arms
• Base Plate, Open-Top Design
• Designed For Low Ceiling Clearance – 9′ 3 1/8″ Columns
• Dual Hydraulic Chain-Drive Cylinders
• Secondary Lock System (SLS)
• Automatic Arm Restraints
• Dual Point Lock Release
• Includes Double Screw-Up Adapters
• Free 8 Piece Truck Adapter Set
• Standard with Premium ALLY Powerunit
• Mounting Hardware Included
• Shipping Weight: 1,700 lbs.
• 5 yr Structural – 2 yr Hydraulic – 2 yr Powerunit Warranty

Car Lifts at NexaDigital

Browse more Car Lifts at NexaDigital.

Forward lift 10,000 lb 2-post lift Overview

Forward lift 10,000 lb 2-post lift is a Car Lifts product available at NexaDigital.

I10 Two-Post Lift Features:

Frame engaging rubber padded truck adapters with multiple extensions to raise most vehicles on the road today. Includes four (each) adapter extensions at 3.5″ and 5″. Spot-Rite™ 3-Stage Front Arms to accommodate vehicles both symmetrically and asymmetrically. This feature allows the technician to position the vehicle doors in front of or behind the column to prevent door damage.

Additional Features:

• 10,000 lbs. capacity for raising most passenger cars, trucks and vans.
• The I10 has been third party tested by ETL and approved by ALI.
• 3-stage front arm design enables you to position doors in front of the column or behind to avoid door damage.
• Includes adjustable frame contact adapters.
• Adapter storage bracket kit.
• Hydraulic cylinders in each column:
  • Top-mounted | Direct pull lifting technology | Cylinder rod concealed inside the carriage

• Requires 12ft ceiling

Car Lifts at NexaDigital

Browse more Car Lifts at NexaDigital.

TP9KF TUX 9,000lb 2 Post Cars Lift – Symmetric Overview

TP9KF TUX 9,000lb 2 Post Cars Lift – Symmetric is a Car Lifts product available at NexaDigital.

Car Lifts at NexaDigital

Browse more Car Lifts at NexaDigital.

Stratus Commercial Grade On-Ground or In-Ground Mount Low Profile Full Rise Scissor Car Lift Overview

Stratus Commercial Grade On-Ground or In-Ground Mount Low Profile Full Rise Scissor Car Lift is a Car Lifts product available at NexaDigital.

This low-profile double scissor lift comes with On-Ground surface mount or In-Ground flush mount design, it is pneumatic safety lock release with overload protection, easy to operate and maintain. Full size scissor car lift is suitable to hold 10,000 lbs. or less, ideally for inspection, repair and maintenance of various types of vehicles.

Product Features

• Commercial grade open center full rise low profile scissor lift
• 2 in 1 design – On-Ground surface mount or In-ground flush mount (see detailed foundation plan)
• Pneumatic safety lock release
• Durable cylinders with anti-surge valves
• Overload protection
• Alloy solid steel X structure, good rust resistance and not easy to deform
• Ramp can be used as platform extension suitable for different length of chassis
• Wear-resisting bearings
• 9 lock position, each lock position is 2 1/8″ (55mm) apart.
• 8 pcs rubber pads included, 4 of each 1 1/2″ & 4″
• Low profile design, minimum height is only 4 5/16″
• 24V low voltage control system
• Platforms can be extended for long vehicles
• Self-lubricated bushing and bearing
• Proofed by dynamic test with 115% of rated capacity and static test with 150% rated capacity
• Powder coating finish: Granite Gray (RAL 7026) + Rein orange (RAL 2004)

Product Specifications

Car Lifts at NexaDigital

Browse more Car Lifts at NexaDigital.

Titan HD2P-9000AC 2-Posts Lift Overview

Titan HD2P-9000AC 2-Posts Lift is a Car Lifts product available at NexaDigital.

Car Lifts at NexaDigital

Browse more Car Lifts at NexaDigital.

Atlas PV15PX 15,000 lb Overhead 2-Post Lift Overview

Atlas PV15PX 15,000 lb Overhead 2-Post Lift is a Car Lifts product available at NexaDigital.

The Atlas® PV series represents the absolute best value for the customer who demands a heavy duty professional grade two post lift at the lowest possible price. Atlas® has been manufacturing the PV series two post above ground lifts for over a decade. Thousands sold! Descriptions such as “bulletproof”, built like a brick outhouse, tougher than nails, and other such euphemistic phrases are used every day to describe any of the Atlas® PV series models.

The Atlas® PV15PX is a commercial grade lift designed to accommodate everything from standard cars to heavy duty service trucks . The distance between the symmetrical columns is almost 123″ with a drive through space of over 108″. The extra distance between the symmetrical columns will allow the widest of vehicles or vehicles with wide rearview mirrors to be lifted or driven through. The increased length of the symmetrical arms coupled with the additional height of the included peg style truck adapter set allows the operator to safely raise long wheel base trucks with a variety of running boards. The extra height means extra clearance allowing you to lift vans and box trucks without worry.

The Atlas® ATTD-PV15PX features three height settings, the lowest setting of 152 inches or 12 foot 8 inches requires the purchase of extra short cables.

• 15,000 lb capacity
• Extra Tall & Extra Wide
• Commercial Grade
• Adjustable height 165″ (13′ 9″) or 177″ (14′ 9″)
• Special low height 152″ (12′ 8″) (Requires purchase of extra cables)
• Symmetric arms
• Automatic Arm Restraints
• “Padded” Shut-Off Bar
• Door Guards on Carriages
• Single Point Lock Release
• Direct-Drive Cylinders
• Powder Coat Finish
• Free 12 Piece Truck Adapter Set
• Mounting Hardware Included
• Shipping weight: 2,490 lbs.
• 5 yr Structural – 2 yr Hydraulic Warranty – Parts Only

Car Lifts at NexaDigital

Browse more Car Lifts at NexaDigital.

Atlas BP12000X 12,000 lbs Baseplate Lift Overview

Atlas BP12000X 12,000 lbs Baseplate Lift is a Car Lifts product available at NexaDigital.

The Atlas BP12000X is a commercial grade heavy duty 12,000 pound capacity 2 post base plate above ground lift. This above ground lift has over sized columns, symmetric three stage arms, and single point lock release.

This lift is perfect for those commercial garages that want to lift heavier vehicles but have limited ceiling height. The Atlas BP12000X can be installed at two different width settings to accommodate wider trucks or trailers and to facilitate “driving between” the lift columns.

Features & Benefits

• 12,000 lb. Capacity
• Heavy Duty, Commercial Grade
• Baseplate, Open-Top Style Lift
• Overall Height: 122 1/2″ (10′ 2 1/2″)
• Adjustable Width
• 3-Stage Symmetric Arms
• Automatic Arm Restraints
• Single-Point Lock Release
• Rubber Guards on Carriages
• Dual Hydraulic Chain-Over Cylinders
• Powder Coat Finish
• Free 12 piece Truck Adapter Set
• Mounting Hardware Included
• 5 yr Structural – 2 yr Hydraulic Warranty

Atlas ATTD-BP12000X Specifications

Car Lifts at NexaDigital

Browse more Car Lifts at NexaDigital.

Mayflower Blacksmith 2 Post Lift Floor Plate BP 9500 lbs Overview

Mayflower Blacksmith 2 Post Lift Floor Plate BP 9500 lbs is a Car Lifts product available at NexaDigital.

BP9500 Features:

– Driving Mode: Heavy Duty Two hydraulic cylinders, chain drive
– Voltage: 220 Voltage
– Lifting weight capacity: 9,000 lbs
– Lifting height max: 71″
– Lifting height max with Truck Adapter: 75″
– Overall Height: 111″
– Overall Width: 132″
– Width between Posts: 106″
– Drive Thru Width: 98″
– Lifting Time: 40 sec – 50 sec
– Motor: 220V 60Hz 1 Phase / 3 Horse Power
– Front Arm assembly 2 Stage reach from 28″ to 42″
– Rear Arm assembly 2 Stage reach from 32″ to 62″
– Double two-point safety lock release with built-in 18 locking positions
– Automatic arm lock restraints
– Drop-in type lifting pads and truck adapters included
– Relief valve built-in power pump to prevent overloading
– Heavy duty 3/10″ diameter cable and 3 2/5″ pulley that reduce high stress on synchronization process and increases cable life
– Ultra-high molecular self-lubricating nylon slider that ensures carriage smooth moving up and down
– Floor concrete requirement: 4″ Depth, 3000 PSI Rebar Reinforced
– Anchor bolts/mounting hardware included
– 1 set of 4″ Truck adapters included
– Door guard protection rubber is optional
– Blue Powder coated finish provides superior resistance against corrosion.
– Shipping Weight: 1250 LB

Car Lifts at NexaDigital

Browse more Car Lifts at NexaDigital.

Incredible Truck Lift for Heavy-Duty Lifting

BendPak’s HDS-18E four-post lift is engineered to make light work out of heavy lifting. It’s built to last and features upgrades that increase safety, durability and productivity. This is the lift that graduates from the class of mid-size trucks, vans and SUVs up to heavy-duty applications. This is a professional car lift that can even handle some industrial and farming equipment. It’s also lighter-duty than other lifts in the truck-weight category, so it’s not overkill when you don’t need, for instance, 20 tons of lift capacity when 9 tons will do just fine.

Extended runways

To accommodate long wheelbases, the HDS-18E offers extended runways that are 249″ front-to-back. This is the first of the heavy-duty models to offer extended runways. All 27K, 35K and 40K lifts are built this way. Better-gripping runways ensure the massive tires on your massive vehicles stay put. If the runways gets slick, their treaded surfaces are still able to grab the wheels without damaging or marring them.

Large base plates

12″ x 12″ base plates don’t just provide a solid foundation, they inspire the confidence to work on virtually any-size vehicle up to the rated weight capacity.

Dual-hub cable sheaves

Supersized 12″ diameter cable sheaves within the runway and cross tubes, combined with massive 4″ diameter sheave axles, dramatically improve cable wear and critical component lifespan, meaning this car lift increases your safety, so you spend less money in service-related expenses down the road.

Heavy-duty aircraft cable

The HDS-18E four-post lift features four galvanized lifting cables that do an excellent job of providing abrasion resistance and preventing fatigue.

Built-in lubrication

Grease nipples are located on every sheave and sheave axle to make lubrication maintenance a breeze.

Spring-loaded safety locks

Spring-loaded safety locks automatically engage continuously during rise, and adjustable safety ladders allow for precise runway leveling, even if the posts have been installed on slightly sloped floors.

Push-button pneumatic lock release

A simple push-button pneumatic lock release makes lowering operations simple and fast. Aircraft-quality stainless steel and aluminum pneumatic cylinders will provide years of trouble-free service.

Secondary lock system

A secondary lock system is on constant guard and acts as a slack-cable device in the unlikely event of an unexpected cable failure. Only consider a four-post lift that offers this secondary lock system.

Integrated design

Lifting cables, airlines, safety latches and sheaves are all fully enclosed within the structure.

Adjustable height locking positions

Features adjustable locking positions for variable-height parking and infinite leveling.

Electric-hydraulic power system

A maintenance-free electric-hydraulic power system assures ultimate dependability. Despite its size and lifting capacity, all controls on the HDS-18E four-post lift are conveniently located within easy reach.

Optional rolling bridge jack (two makes a set)

Rolling jacks are used to raise the front or rear portion of a vehicle off the car lift’s runways, allowing operators to perform efficient wheel and brake service. A pair of jacks allows the entire vehicle to be elevated. Each jack has telescoping arms and frame contact pads that can be extended over the runways and positioned under vehicle lifting points. Each jack features three safety-lock positions and stackable truck and van adapters for increased lifting height and better access to frame contact points on high ground-clearance vehicles. The jacks come equipped with a commercial-grade air-hydraulic pump.

Incredible Truck Lift for Heavy-Duty Lifting

BendPak’s HDS-18E four-post lift is engineered to make light work out of heavy lifting. It’s built to last and features upgrades that increase safety, durability and productivity. This is the lift that graduates from the class of mid-size trucks, vans and SUVs up to heavy-duty applications. This is a professional car lift that can even handle some industrial and farming equipment. It’s also lighter-duty than other lifts in the truck-weight category, so it’s not overkill when you don’t need, for instance, 20 tons of lift capacity when 9 tons will do just fine.

Extended runways

To accommodate long wheelbases, the HDS-18E offers extended runways that are 249″ front-to-back. This is the first of the heavy-duty models to offer extended runways. All 27K, 35K and 40K lifts are built this way. Better-gripping runways ensure the massive tires on your massive vehicles stay put. If the runways gets slick, their treaded surfaces are still able to grab the wheels without damaging or marring them.

Large base plates

12″ x 12″ base plates don’t just provide a solid foundation, they inspire the confidence to work on virtually any-size vehicle up to the rated weight capacity.

Dual-hub cable sheaves

Supersized 12″ diameter cable sheaves within the runway and cross tubes, combined with massive 4″ diameter sheave axles, dramatically improve cable wear and critical component lifespan, meaning this car lift increases your safety, so you spend less money in service-related expenses down the road.

Heavy-duty aircraft cable

The HDS-18E four-post lift features four galvanized lifting cables that do an excellent job of providing abrasion resistance and preventing fatigue.

Built-in lubrication

Grease nipples are located on every sheave and sheave axle to make lubrication maintenance a breeze.

Spring-loaded safety locks

Spring-loaded safety locks automatically engage continuously during rise, and adjustable safety ladders allow for precise runway leveling, even if the posts have been installed on slightly sloped floors.

Push-button pneumatic lock release

A simple push-button pneumatic lock release makes lowering operations simple and fast. Aircraft-quality stainless steel and aluminum pneumatic cylinders will provide years of trouble-free service.

Secondary lock system

A secondary lock system is on constant guard and acts as a slack-cable device in the unlikely event of an unexpected cable failure. Only consider a four-post lift that offers this secondary lock system.

Integrated design

Lifting cables, airlines, safety latches and sheaves are all fully enclosed within the structure.

Adjustable height locking positions

Features adjustable locking positions for variable-height parking and infinite leveling.

Electric-hydraulic power system

A maintenance-free electric-hydraulic power system assures ultimate dependability. Despite its size and lifting capacity, all controls on the HDS-18E four-post lift are conveniently located within easy reach.

Optional rolling bridge jack (two makes a set)

Rolling jacks are used to raise the front or rear portion of a vehicle off the car lift’s runways, allowing operators to perform efficient wheel and brake service. A pair of jacks allows the entire vehicle to be elevated. Each jack has telescoping arms and frame contact pads that can be extended over the runways and positioned under vehicle lifting points. Each jack features three safety-lock positions and stackable truck and van adapters for increased lifting height and better access to frame contact points on high ground-clearance vehicles. The jacks come equipped with a commercial-grade air-hydraulic pump.

Atlas 9,000 lbs 2 Post Baseplate Lift Overview

Atlas 9,000 lbs 2 Post Baseplate Lift is a Car Lifts product available at NexaDigital.

The Atlas® 9KBPX is an economically designed baseplate two-post lift great for low ceiling garages. The total column height of 111 ½” (9 feet 3 ½ inches) allows this lift to be installed in almost any professional or home garage with a ceiling as low as 9 feet 6 inches.

The Atlas® 9KBPX “chain over roller” lift features a spring loaded Secondary Lock System (SLS) that automatically engages in the event of a slack or broken chain. The reliable dual chain-drive cylinders, symmetric arms, and automatic arm restraints make this the perfect choice for “Mr. Homeowner” or small commercial shop looking to service cars, SUV’s and light duty trucks (not recommended to lift Diesel Dually or other large trucks).

Features & Benefits

• 9,000 lb. Capacity
• Baseplate, Open-Top Style Lift
• Designed For Low Ceiling Clearance – 9′ 3 ½” Columns
• Symmetric Arms
• Dual Hydraulic Chain-Drive Cylinders
• Secondary Lock System (SLS)
• Free 8 Piece Truck Adapter Set
• Automatic Arm Restraints
• Dual Point Lock Release
• Mounting Hardware Included
• 2 yr Structural – 1 yr Hydraulic Warranty – Parts Only

Atlas® XH-9KBPX Specifications

Car Lifts at NexaDigital

Browse more Car Lifts at NexaDigital.

ESCO 10-Ton Hydraulic Stak-Able Ram Kit Overview

The high-quality ESCO 10-Ton Hydraulic Stak-Able Ram Kit is specifically designed for a wide range of heavy-duty applications in the tire/wheel service market and many more. The Stak-Able Ram Kit eliminates the tedious effort required to push rusted, corroded wheels off hubs. Ideal for stubborn 22.5″ and 24.5″ wheels, the Stak-Able Ram Kit is far more resilient and robust than any other equipment alike on the market. Designed for applications in heavy-duty commercial and OTR industry use. Use extensions within the kit separately or as a single long extension.

Features

• Great For Use In Multiple Applications In The Tire/Wheel Service Market And Many More
• Ideal For Low Clearance Applications
• Used To Break The Back Bead By Pushing Off The Chassis On Heavy Duty Equipment
• Great For Loosening Seized Wheels From Back-End Of Vehicle On Heavy Duty Equipment
• Easy Snap-In Extensions
• Made Of High-Quality Steel
• Most Versatile 10-Ton Ram On The Market
• Easy To Switch Out Extensions For Optimal Extension Length
• Includes Carrying Case

Specifications

• Capacity: 10 Tons (20,000 lbs.)
• Maximum Pressure: 10,000 psi
• Retracted Height: 3.5″
• Extended Height: 5″
• Maximum Height: 11.25″
• Stroke: 1.3125″
• Saddle: 0.375″
• Extension 1: 1″
• Extension 2: 2″
• Extension 3: 3″
• Weight: 10 lbs.
• Dimensions (Product Case): 12″ W x 5″ L x 5″ H
• Dimensions (Packaging): 12″ W x 10″ L x 5″ H
• Warranty: (3) Years Limited*

Uncategorized at NexaDigital

Browse more Uncategorized at NexaDigital.

Triumph 11K 2 Post Clearfloor Lifts with Single Side Release Overview

Triumph 11K 2 Post Clearfloor Lifts with Single Side Release is a Car Lifts product available at NexaDigital.

Car Lifts at NexaDigital

Browse more Car Lifts at NexaDigital.

Atlas Light Commercial Grade Baseplate 9,000 lbs. Capacity Overview

Atlas Light Commercial Grade Baseplate 9,000 lbs. Capacity is a Uncategorized product available at NexaDigital.

The Atlas® 9KBPX is an economically designed baseplate two-post lift great for low ceiling garages. The total column height of 111 ½” (9 feet 3 ½ inches) allows this lift to be installed in almost any professional or home garage with a ceiling as low as 9 feet 6 inches.

• 9,000 lb. Capacity
• Baseplate, Open-Top Style Lift
• Designed For Low Ceiling Clearance – 9′ 3 ½” Columns
• Symmetric Arms
• Dual Hydraulic Chain-Drive Cylinders
• Secondary Lock System (SLS)
• Free 8 Piece Truck Adapter Set
• Automatic Arm Restraints
• Dual Point Lock Release
• Mounting Hardware Included
• Shipping Weight: 1,400 lbs.
• 2 yr Structural – 1 yr Hydraulic Warranty – Parts Only

Uncategorized at NexaDigital

Browse more Uncategorized at NexaDigital.

Atlas 9OHSC 9,000 lb Overhead 2-Post Lift Overview

Atlas 9OHSC 9,000 lb Overhead 2-Post Lift is a Car Lifts product available at NexaDigital.

The Atlas® 9OHSC two post above ground lift is the perfect choice for those smaller commercial repair facilities

• 9,000 lb. Capacity
• Overhead, Open-Floor Lift
• Single-Piece Column Design
• Overall Height: 142″ (11′ 10″)
• 3-Stage Front Arms/2-Stage Rear Arms
• Automatic Arm Restraints
• Single-Point Lock Release
• Rubber Guards on Carriages
• Dual Hydraulic Chain-Drive Cylinders
• Free 12 Piece Truck Adapter Set
• Mounting Hardware Included
• Shipping Weight: 1,430 lbs.
• 5 yr Structural – 2 yr Hydraulic Warranty

Car Lifts at NexaDigital

Browse more Car Lifts at NexaDigital.

Atlas PV10PX 10,000 lb Overhead 2-Post Lift Car Overview

Atlas PV10PX 10,000 lb Overhead 2-Post Lift Car is a Car Lifts product available at NexaDigital.

• 10,000 lb. capacity
• Commercial Grade
• Adjustable Height – 11′ 11 1/8″ or 12’3″
• Asymmetric/Symmetric Arms
• Automatic Arm Restraints
• “Padded” Shut-Off Bar
• Padded Carriages
• Single Point Lock Release
• Direct-Drive Cylinders
• Powder Coat Finish
• Free 12 Piece Truck Adapter Set
• Mounting Hardware Included
• Shipping Weight: 1,905 lbs.
• 5 yr Structural – 2 yr Hydraulic Warranty – Parts Only

Car Lifts at NexaDigital

Browse more Car Lifts at NexaDigital.